Noris - Variable speed control - conversion set (PA-0005)
With this conversion kit you can adjust the speed of your Noris projector at any value between 15 and 21 images per second. You can precisely control the speed.
This set works for most Noris projectors with a DC motor and electronic speed handling.
Build in and tested for these projectors:
- Noris Norisound 110 / 110D
- Noris Norisound 310 / 310D
- Noris Norisound 810
- Noris Record 200 SM
- Noris Record 324
- Noris Record SM3
- Potentiometer in th projector with some extra electronics replaced by a potentiometer on the outside of the projector.
- When the projector is in the position: 18 f/s, you can adjust the speed using the new potentiometer. When the projector is in the position 24 f/s, the projector will run 24 f/s.
Tools and Skills :
To perform the work , the following tools are required : soldering iron and rosin core solder , wire stripper and cutter , screwdrivers , metal drill 6 and 10 mm wrench 14 , tweezers or tongs ; desired speedometer projector ELV RC200
Here are some technical skills such as drilling in plastic , soldering and de- soldering , mounting and assembly required , together with a good attention / caution when opening / closing the projector cabinet and testing after installation . The installation is done at your own risk .
Comes with installation instructions.
We also offer the service to build in this kit to your projector.
Weight: 30 grams